In May 2007, Montana enacted legislation (H.B. 3) that allows a property tax abatement for new renewable energy production facilities, new renewable energy manufacturing facilities, and renewable energy research and development equipment. Eligible facilities and equipment are assessed at 50% of their taxable value.

Qualifying renewable energy manufacturing facilities are those that (1) produce materials, components or systems to convert solar, wind, geothermal, biomass, biogas or waste heat resources into useful energy, and (2) whose annual production of renewable energy equipment makes up at least half of the facility's total production. Fuel cells and components of fuel cells that generate

In 2007, Idaho enacted a bill that restructured the method of taxation for producers of wind energy from a property tax to a tax on production. The aim of this restructuring was to ease the burden on commercial wind farms in the early years of operation. In 2008, Idaho enacted further legislation to include geothermal energy producers under this method of taxation, and solar energy producers were included under legislation (H.B. 534) enacted in 2016. 

Under these policies, commercial wind, solar, and geothermal energy producers, excluding those regulated by the Idaho Public Utilities Commission, are exempt from paying

In September 2007, Camden County adopted a wind ordinance to regulate the use of wind-energy systems in the county and to describe the conditions by which a permit for installing such a system may be obtained.

For the purposes of this ordinance, wind-energy systems are classified as “large” if they consist of one or more turbines with a rated generating capacity of more than 100 kilowatts (kW), “small” if a project consists of a single turbine rated at less than 20 kW, and "medium" if one or more turbines rated between 20 kW and 100 kW. A site permit is

Note: This model ordinance was designed to provide guidance to local governments seeking to develop their own siting rules for wind turbines. While it was developed as part of a cooperative effort involving several state agencies, the model itself has no legal or regulatory authority. 

In 2007, the Massachusetts Department of Energy Resources (DOER) and the Massachusetts Executive Office of Environmental Affairs (EOEA) issued a model ordinance or by-law that may be modified and adopted, as necessary, by local governments that want to promote wind-energy development. In 2009, DOER and EOEA amended the model ordinance to cover both small and

In 2006, Watauga County adopted a wind ordinance to regulate the use of wind-energy systems in the county and to describe the conditions by which a permit for installing such a system may be obtained. This policy was adopted in the context of an on-going debate over the legal interpretation of the 1983 Ridge Protection Act.

For the purposes of this ordinance, wind-energy systems are classified as “large” if they consist of one or more turbines with a rated generating capacity of more than 20 kilowatts (kW) and “small” if a project consists of a single turbine rated at

Green Power Purchasing Executive Order

By an executive order from the Mayor's Office, City of Lansing facilities are required to procure 10% of their energy consumption from renewable sources by 2010, escalating to 15% in 2015 and 20% in 2020. This green power purchasing policy is part of a broader initiative designed to reduce the contribution that city facilities make to greenhouse gas emissions and climate change. Several additional provisions apart from green power procurement are contained in the order, among them a goal of reducing energy use in city facilities by 10% as soon as it is practical and

In 2007 Ashe County adopted a wind ordinance to regulate the use of wind-energy systems in unincorporated areas of the county and to describe the conditions by which a permit for installing such a system may be obtained. This policy was adopted in the context of an ongoing debate over the legal interpretation of the 1983 Ridge Protection Act.

For the purposes of this ordinance, wind-energy systems are classified as “large” if they consist of one or more turbines with a rated generating capacity of more than 20 kilowatts (kW) and “small” if a project consists of a single

Santee Cooper offers low-interest loans to residential customers who have a licensed contractor install photovoltaic (PV) systems, wind energy systems, micro-hydropower systems, biomass energy systems, or solar water heaters. 

"A Smart Energy loan from Santee Cooper allows you to finance energy efficient improvements for your home that should help you reduce your energy costs. You can apply for Smart Energy loans ranging from $500 to $20,000 with up to 60-months to repay loans over $1000. All with no money down. Maximum outstanding energy efficiency loans per customer cannot exceed $20,000."

NOTE: In July 2016, FERC issued Order 828 revising the Small Generation Interconnection Agreement (SGIA) to require newly interconnecting small generators under 20 MW to ride through abnormal frequency and voltage events and not be disconnected during such events. 

Origin

Through its Orders 792 and 792-A, the Federal Energy Regulatory Commission (FERC) adopted new "small generator" interconnection standards for distributed energy resources up to 20 megawatts (MW) in capacity in November 2013 and September 2014, respectively. These standards made revisions to those promulgated by FERC in May 2005 through its Order 2006. The FERC's standards apply only to facilities subject

Commercial and net metering alternative energy investments of $5,000 or more are eligible for a tax credit of up to 35% against individual or corporate tax on income generated by the investment. The investment must be depreciable. The credit is applied only against taxes due as a consequence of taxable or net income produced by:

• A manufacturing plant that is located in Montana and that produces alternative energy generating equipment;
• A new business facility or the expanded portion of an existing business facility that supplies basic energy needed from the alternative energy generating equipment, on a direct contract sales basis