Clarusys (ROC 266981 K-11) is a Consultation, Design, Engineering, Integration and installation Company. We undertake above services individually or as turnkey projects; however, our turnkey projects include all of the above services.
Once the client places an order, provides the site and Govt permits etc., we start the projects and hand over an operational system ready to be interconnected to the grid. Should the client desire, we shall also undertake liaison with the Govt and electricity Company for permission/incentives as well as for interconnection with the Grid. The fees for these services will be extra. The components that we shall be using are as follows:
175 to 200-280W PV Modules, each from the world’s renowned manufacturers, in suitable arrays, based on the design parameters we shall be laying out, after the site visit. These modules shall carry a manufacturer's warranty of 25 Years. Major technical parameters are attached.
Mounting systems - There are two types of mounting systems as given below:
The fixed array system
In this system, modules are mounted on rails at a specific tilt angle facing due South and are rigidly fixed, therefore cannot track the sun. Although, the power generation in this manner gets degraded to some extent, the overall cost of the system is low, therefore, allowing additional number of Modules to be used compensating the loss of power, but increasing system reliability by removing the moving mechanisms..
In this system panels are mounted on sun trackers that enable the modules to move on one/two axes, thereby keeping them facing the sun all the time and generating maximum power. The trackers are expensive and require regular maintenance, but increase the power output. .
Clarusys has the required expertise to design, engineer and install any of the above systems. However, Clarusys shall advise the client on an optimum system configuration and design, after site visit and consideration of all other factors.